hardware:arduino_nano_rp2040_connect
Table of Contents
Arduino Nano RP2040 Connect
The Nano RP2040 Connect is an Arduino Nano board with a Raspberry Pi RP2040 microcontroller that supports Bluetooth, WiFi, and machine learning. It has an onboard accelerometer, gyroscope, microphone, and temperature sensor.
Specifications
| Microcontroller: | Raspberry Pi® RP2040 |
| USB connector: | Micro USB |
| Pins | |
|---|---|
| Built-in LED pin: | 13 |
| Digital I/O Pins: | 20 |
| Analog Input Pins: | 8 |
| PWM pins: | 20 (Except A6, A7) |
| External interrupts: | 20 (Except A6, A7) |
| Connectivity | |
| Wi-Fi: | Nina W102 uBlox module |
| Bluetooth: | Nina W102 uBlox module |
| Secure element: | ATECC608A-MAHDA-T Crypto IC |
| Sensors | |
| IMU: | LSM6DSOXTR (6-axis) |
| Microphone: | MP3DT06JTR |
| Communication | |
| UART: | Yes |
| I2C: | Yes |
| SPI: | Yes |
| Power | |
| Circuit operating voltage: | 3.3V |
| Input Voltage (VIN): | 5-21V |
| DC Current per I/O pin: | 4 mA |
| Clock speed | |
| Processor: | 133 MHz |
| Memory | |
| AT25SF128A-MHB-T: | 16MB Flash IC |
| Nina W102 uBlox module: | 448 KB ROM, 520KB SRAM, 16MB Flash |
| Dimensions | |
| Weight: | 6 g |
| Width: | 18 mm |
| Length: | 45 mm |
hardware/arduino_nano_rp2040_connect.txt · Last modified: 2025/02/08 07:16 by jimc