Knowledge Base

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Stream Media from Ubuntu/Mint Linux to XBox360 ======
☛ **UPDATE**: uShare is still the best (in my opinion) way to quickly get a UPnP server running, with low overhead.  If you’re interested in a more comprehensive solution, though, I recommend that you check out [[http://www.plexapp.com/|Plex Media Server]].  It’s a bit more work to set up, and also more taxing on your host machine, but //very// feature-rich.  (It has a [[https://en.wikipedia.org/wiki/Roku|Roku]] client channel too, which uShare does not.)  I also have a newer article discussing [[minidlna|MiniDLNA]], another lightweight media server.

===== Original Article =====
The UPnP media server standard employed by Windows Media Center can be emulated using a utility called uShare.

<code bash>sudo apt-get install ushare</code>

Then, edit /etc/ushare.conf and make the following changes:

<code ini>USHARE_NAME=uShareMedia  # The name you want to be visible on your network.
 
# Interface to listen to (default is eth0).
USHARE_IFACE=eth1  # Change this to your active interface
 
# Port to listen to (default is random from IANA Dynamic Ports range)
# Ex : USHARE_PORT=49200
USHARE_PORT=  # You probably won't need to change this.
 
# Port to listen for Telnet connections
# Ex : USHARE_TELNET_PORT=1337
USHARE_TELNET_PORT=  # Same here.
 
# Directories to be shared (space or CSV list).
USHARE_DIR=/dir1,/dir2  # Point this to the directory/ies containing the media files you want to share.
 
# Use XboX 360 compatibility mode (yes/no)
USHARE_ENABLE_XBOX=yes  # This one's important.  Allows your XBox console to access the media share
 
# Use DLNA profile (yes/no)
# This is needed for PlayStation3 to work (among other devices)
USHARE_ENABLE_DLNA=</code>

Use this command to start up the service:

<code bash>ushare -xD</code>

If you need to “cycle” the service (eg, to pick up new media files), use this:

<code bash>killall -q ushare
 
ushare -xD</code>