Knowledge Base

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Arduino Nano RP2040 Connect ======

The Nano RP2040 Connect is an Arduino Nano board with a Raspberry Pi RP2040 microcontroller that supports Bluetooth, WiFi, and machine learning. It has an onboard accelerometer, gyroscope, microphone, and temperature sensor.

| Product page: | https://store.arduino.cc/products/arduino-nano-rp2040-connect-with-headers |
| Arduino docs: | https://docs.arduino.cc/hardware/nano-rp2040-connect/ |
| Technical reference: | https://docs.arduino.cc/tutorials/nano-rp2040-connect/rp2040-01-technical-reference/ |

{{:hardware:nano_rp2040_front.jpg?400|}}

{{:hardware:nano_rp2040_back.jpg?400|}}

{{:hardware:nano_rp2040_pinout.jpg?400|}}
===== Specifications =====

| Microcontroller: | Raspberry Pi® RP2040 |
| USB connector: | Micro USB |
^ Pins ^^
| Built-in LED pin: | 13 |
| Digital I/O Pins: | 20 |
| Analog Input Pins: | 8 |
| [[glossary:pwm|PWM]] pins: | 20 (Except A6, A7) |
| External interrupts: | 20 (Except A6, A7) |
^ Connectivity ^^
| Wi-Fi: | Nina W102 uBlox module |
| Bluetooth: | Nina W102 uBlox module |
| Secure element: | ATECC608A-MAHDA-T Crypto IC |
^ Sensors ^^
| [[glossary:imu|IMU]]: | LSM6DSOXTR (6-axis) |
| Microphone: | MP3DT06JTR |
^ Communication ^^
| [[glossary:uart|UART]]: | Yes |
| [[glossary:i2c|I2C]]: | Yes |
| [[glossary:spi|SPI]]: | Yes |
^ Power ^^
| Circuit operating voltage: | 3.3V |
| Input Voltage (VIN): | 5-21V |
| DC Current per I/O pin: | 4 mA |
^ Clock speed ^^
| Processor: | 133 MHz |
^ Memory ^^
| AT25SF128A-MHB-T: | 16MB Flash IC |
| Nina W102 uBlox module: | 448 KB ROM, 520KB SRAM, 16MB Flash |
^ Dimensions ^^
| Weight: | 6 g |
| Width: | 18 mm |
| Length: | 45 mm |

{{tag>hardware}}